experchange > sun

Warren Hardy (02-28-20, 09:52 PM)
My system stopped working it is an Ultra 60.

I get the following error

WARNING: /pci@1f,4000/scsi@3 (glm0):
Connected command timeout for Target 0.0
WARNING: /pci@1f,4000/scsi@3 (glm0):
got SCSI bus rest

Then the message continues like this for SCSI 3,1 and target 0.0, 1.0, 2.0, 3.0 etc

Then the system hangs.

This all happens after the system has started booting Solaris. I have swapped out drives. Tried boot from a dvd, I get the same.

Any ideas on what is the cause or probably fix.
Chris (03-01-20, 01:07 AM)
On 02/28/20 19:52, Warren Hardy wrote:
> My system stopped working it is an Ultra 60.
> I get the following error
> WARNING: /pci@1f,4000/scsi@3 (glm0):
> Connected command timeout for Target 0.0
> WARNING: /pci@1f,4000/scsi@3 (glm0):
> got SCSI bus rest
> Then the message continues like this for SCSI 3,1 and target 0.0, 1.0, 2.0, 3.0 etc
> Then the system hangs.
> This all happens after the system has started booting Solaris. I have swapped out drives. Tried boot from a dvd, I get the same.
> Any ideas on what is the cause or probably fix.


Sounds like a controller fault, but have you checked cabling ?...
Chris
Warren Hardy (03-04-20, 09:03 AM)
On Saturday, February 29, 2020 at 3:07:55 PM UTC-8, Chris wrote:
> On 02/28/20 19:52, Warren Hardy wrote:
> Sounds like a controller fault, but have you checked cabling ?...
> Chris

I moved the computer, checked all the cables, nothing changed, then I moved the computer again, fixed itself
Grant Taylor (03-04-20, 07:03 PM)
On 3/4/20 12:03 AM, Warren Hardy wrote:
> I moved the computer, checked all the cables, nothing changed, then
> I moved the computer again, fixed itself


Hum. :-/

In my experience, such fixes have a tendency to not remain fixed and /
or unfix themselves in an unpleasing way.

Good luck.
Similar Threads