experchange > xml

softwareps team (09-20-07, 12:14 PM)
Download Latest Petroleum / Chemical / Plant Engineering / CAD CAM CFD
FEA Engineering Software

Let's put an end to your rigorous search for softwarePS, sending money
and getting cheated, paying for evaluation versions in the name of full
versions etc.. You can get almost all full working versions under one
roof.

>You need any type of CAD CAM CAE CFD FEA EDA PCB GIS CNC or any other

type of software....SoftwarePS can provide you ..
:You need software at low cost... contact 'SoftwarePS'
:You need fully working and professional version of engineering
software...'SoftwarePS' is the right choice
:You are searching for trustable and real crack software sellers....
'SoftwarePS' is the right choice.
:You need to have the copy of software available if you lost your
copy....'SoftwarePS' will provide you
:You need not to spend valuable money on shipment...'SoftwarePS'
provides high speed HTTP downloading without any cost
:You need not to pay high transaction amount for sending
money....'SoftwarePS' is the right choice.

New Software:
===========
Below new software added..

ASPENONE ASPEN ENGINNERING Suite v2006 - 6 CDs
SCANDPOWER PETROLEUM TECHNOLOGY OLGA v5.2.1 - 1CD
DYADEM PHA Pro v6.0 - 1CD
**** Hazard Analysis Software ****
SUNRISE SYSTEM PIPENET Vision v1.12 - 1CD
[Spray/Sprinkler v4.01, Standard v4.01, Transient v6.02]
**** Steady/Tranient Fluid Flow Analysis of Pipe, Duct and Sprinkler
Networks ****
SolidCAM v2007 R11.1 - 1CD
Primavera Expedition v10.1 - 2CDs
Sescoi-Worknc v17.03 - 1CD
UGS NX 5.0.25 - 1DVD
CSI SAP2000 V11.0 - 1CD
IMOLD2006 for solidworkS - 1CD
Haliburton Landmark (DSS) v2003.14 - 1CD
BENTLEY AUTOPIPE XM v8.0.9.00.14 - 2006 ed - 1CD
**** Piping Stress Analysis Software ****
Zeataline PipeSupport-Pro v3.1 - 1CD
Zeataline PipeData-PRO 7.2 - 1CD
COADE CAESAR II v5.00.6 - 1CD
COADE PVElite v2006 - 1CD
Electronic Corrosion Engineer v4.0 - 1CD
**** Corrosion Rate Predictor, Risk Prediction, Corrosion Resistant
Alloy Evaluator and Life Cycle Cost Calculator of Flow Lines and Tubing
****

HTC ACX and STX v3.5.65 - 1CD
Tahoe Pumpbase v2.0c - 1CD
DYADEM FMEA-Pro v6.0 - 1CD
**** Failure Mode and Effects Analysis software solution *****
IHS Energy Pipesoft-2 v6.5 - 1CD ...[for this software you have to
contact me after every 2 months to get new serial keys.]
**** steady-state flow simulator for single or multiphase fluid systems
****
IHS Energy Gas Lift v2.0 - 1CD
IHS Energy OilWAT - GasWat v10.10 - 1CD
**** Comprehensive material balance analysis (conventional and
generalized) ****
IHS Energy PVTlib v5.01 - 1CD
**** Black oil/compositional properties, over 140 correlations ****
IHS Energy Raptor v3.4 - 1CD
**** Fast well test analysis ****
IHS Energy Vol Oil - Vol Gas v2.01 - 1CD
**** Volumetrics, Monte Carlo and estimated recoveries ****
IHS Energy Subpumpv8.0 - 1CD
**** Electric submersible pump design and analysis ****
IHS Energy Perform v6.0 - 1CD
**** NODAL analysis, well/flowline optimization *****
TEKLA Structures v13 - 1CD
PROTEUS ENGINEERING FASTSHIP V6.1.29 - 1CD
PROTEUS ENGINEERING MAESTRO V8.7.6 - 1CD
DNV PHAST and SAFETI v6.5 - 1CD
**** Hazard analysis software *****
INFOCHEM MULTIFLASH v3.5 - 1CD
Abaqus v6.7 Win32 - 2CDs
CALSEP PVTSIM v16 - 1CD

ASPENONE ASPEN Flarenet v2006 (with Manuals) - 1CD
ASPENONE ASPEN HYSYS v2006 ( with manuals) 1CD
Pipenet v1.10 (with manuals) - 1CD
[ Spray v4.00 - Standard v4.00 - Transient v6.00]
Earth Desiciin Suite (Gocad ) V2.1.2
IHS Energy Perform 6.0 1 CD
ASPENONE ASPEN HTFS v2006 1CD
CALSEP PVTSim v16.0 - 1CD
COADE PVElite v2006 - 1CD
COADE CAESAR II v5.0 - 1CD
DNV PHAST 6.51 - 1CD
REIUSA STAAD PRO v2006
UNIDO Comfar III Expert V 3.0
Rockware Rockworks 2006 v6.6.30
E-Ware ETank2000 V1.5.400
SCHLUMBERGER Drilling Office 3.1
Kappaeng Emeraude v2.42
Kappaeng Topaze v1.0
Kappaeng K-Prospect v1.0
Kappaeng Diamant v1.10
Kappaeng Saphir v3.20
Kappaeng Ecrin v.4.0
Merak Value and Risk Suite 3.0 - 1CD
Romar Irap RMP V7.5
SCHLUMBERGER PETREL V2005
Tekla Structures v12.0 - 1 CD (with platenesting module)
Genstat v9.1.147 - 1CD
SIMSCI PRO/II v8.0 - 1CD
Actel Designer v7.2 SPA - 1CD
ITTVIS ENVI v4.3 - 1CD
HTRI Xchanger Suite v5.0 - 1CD
{Xace , Xfh , Xhpe , Xist , Xjpe , Xphe , Xspe, Xtlo , and
Xvib ]
Fledermaus Pro v6.3 - 1CD
Plaxis 3D Foundation v1.1 SP3 - 1CD
PLAXIS 3D TUNNEL v1.2 - 1CD
Prosteel 3D v17 for autocad2004-2006 - 1CD
Sclumberger ECLIPSE v2006.1 - 1CD
ASPENONE ASPEN HTFS and HTFS+ v2004.2 (with manuals) - 1CD
UGS Solid Edge v19.0 - 1DVD
Schlumberger PIPESIM v2006.1 - 1CD
[PF, WDP, NA, GOAL, FRPT, PVT and HOSIM]
Articad Kitchen Designer v7.07 - 1CD
PENG ENGINEERING SIMFLEX II v7.0 - 1CD
*** Piping Stress Analysis Software ****
SDRC I-DEAS NX12 M2 - 1DVD
ASPENONE ASPEN HYSYS v2004.2 (with manuals) - 1CD
SHELL RESEARCH LIMITED - SHELL SHEPHERD Software - 1CD
[Shell Fred v4.0 and Shell Shepherd Desktop v1.1]
**** Fire, Release, Explosion, Dispersion and Hazard consequence
modelling package ***
SHOECAM v4.2 - 1CD
ACECAD STRUCAD v11.0 - 1CD
Pipeline studio v2.1 - 1CD
Virtual Materilas Group VMGSIM v2.5.1 - 1CD
*** Steady State Process Simulator ***
EPS (Dynalift) Last version
EPS (PanSys) Last version
EPS (Pan Scan) Last version
EPS (Math bal) Last version
EPS (Math bal) Last version
EPS (Well flow) Last version
EPS (Field flow) Last version
Schlumberger Eclipse v2006 - 1CD
Schlumberger Eclipse v2005A - 1CD
Petroleum Experts IPM v5.2 - 1CD
[GAP v6.2, MBAL v8.2, PROSPER v9.2, PVTP v7.2, RESOLVE v2.2, and REVEAL
v2.2]
CMG 2006 1CD
Pipe Flow Advisor v1.0 - 1CD
Pipe Flow Wizard v1.07 - 1CD
StruCalc v7.01.05 - 1CD
Nemetschek Allplan v2006.1 - 1CD
Midas Civil v20060412 - 1CD
Rocscience Phase2 v6014 - 1CD
SCHLUMBERGER PETREL v2005 - 1CD
DLUBAL RFEM v2.01.643 - 1CD
EMRC NISA CIVIL v14 - 1CD
ROXAR IRAM RMS v7.5 - 1CD
Z_soil2D v6.13 - 1CD
SCANDPOWER PETROLEUM TECHNOLOGY OLGA v5.0.2 - 1CD
*** World's Best Multiphase Flow Simulator ***
FLEXISIGN PRO 7.6 v2 - 2CDs
Dassault Systemes Catia P3 v5r16 P3 - 4CDs
HKS ABAQUS v6.6.1 - 3CDs
HKS ABAQUS v6.6.1 Documentation 1CD
IAFES FOUNDATION v2.5 1CD
CAMBRIDGESOFT BioOffice Ultra v2006 1CD
CAMBRIDGESOFT ChemOffice Ultra v2006 1CD
PTC Pro Engineer Wildfire v3.0 M020 x64 2CDs
PTC Pro Engineer Wildfire v3.0 M020 Linux 2CDs
PTC Pro Engineer Wildfire v3.0 M020 3CDs
MIN SAP 6.2 - 3CDs
CEi EnSight v8.07 - 1 DVD
CITECT SCADA v6.10 - 1CD
Mathcad Enterprise Edition v13.1- 1CD
DIMSOLN DSANCHOR v2.6.1 - 1CD
PRIMAVERA v5(Primavera Project Planner P3) - 1CD
ABAQUS for CATIA v5R16 v2.2 - 1CD
ENGINEERING DYNAMICS SACS v5.2 - 1CD
ETAP PowerStation v5.0.3 (with manuals) - 1CD
Primavera P3e-c v5.0 - 3CDs
AVL SWIFT v3.1.1 - 1CD
AVL FIRE v8.31 - 1CD
AVL WorkSpace SUITE v4.0 -1CD
[AUTOSHAFT v1.0, AVL Excite v6.0.1, AVL Tyconv5.1.1, AVL Glide v4.4.1,
AVL Bricks v3.2.1, AVL Hydsim v4.3.1, AVL Boost v4.0.3, AVL TNG v1.0 and
AVL Impress v1.2]
Altera Quartus II v6.0 - 2CDs
Autodesk MAP 3D v2007 - 2CDs
Autodesk VIZ v2007 - 2CDs
Autodesk Civil Design v2007- 1CD
Autodesk AutoCAD Mechanical v2007 - 1CD
Autodesk Land Desktop v2007 - 4CDs
Autodesk AutoCAD LT v2007 - 1CD
Autodesk AutoCAD Electrical v2007- 1DVD
Autodesk Inventor Professional v11- 5CDs
Autodesk Survey v2007- 1CD
Autodesk MAP 3D v2007 - 2CDs
Delcam Powermill PM6008 CB1071050 SP7a - 1CD
ProCAD 2D Designer v2004 2 Datecode 2006 05 - 1CD
BENTLEY / REBIS WinNozl v03.00.00.07 - 1CD
ARRIS v9.0.112 - 1CD
PTC Pro Engineer Wildfire v3.0 M010 (3CD+X64 3CD+Linux 2CD)
IMS Design CAD 3DMax v16.2 - 1CD
INUS Technology RapidForm v2006 - 1CD
Rhinoceros 3D v3.0 SR5 - 1CD
DNV PHAST 6.0 - 1CD
*** Process Hazard Analysis Software Tool ***
COADE CADWORKX DATASHEETS BUILD FEB 2006 - 1CD
CAODE Cadworx Pipe v2004 - 1CD
CSC FASTRAK v12.0 - 1CD
CSC TEDDS v9.0 - 1CD
Intergraph Intools v6.0 - 1CD
*** Instrumentation Design Software ***
IdeCAD Architectural IDS v5.14 - 1CD
IdeCAD Structural IDS v5.14 - 1CD
REIWORLD STAAD Beam v1.2 1CD
CNC Machinist ToolBox v8.1.0 - 1CD
MSC MARC v2005 R3 - 1CD
Airplan v8.5.3 - 1CD
Ashlar Vellum Graphite v7.6.2 - 1CD
Beacon Designer v5.1 - 1CD
CCDC GOLD v3.0.1 AIX - 1CD
CoDeveloper Universal v2.10 E.20 - 1CD
Delcam Powermill PM6008 CB1071048 SP6 - 1CD
Engenious Systems Inc StormShed2G.v7.0.0.13 - 1CD
GAEA POLLUTE v7.063 - 1CD
GAEA WINFENCE v2.13 - 1CD
GAEA WINLOG v4.37 - 1CD
Gproms Modelbuilder v2.3.4 - 1CD
Gridgen v15.09.R2 - 1CD
Identify AppSight v5.72 - 1CD
Impulse CoDeveloper Universal v2.10.E.15 - 1CD
MINITAB v14.20 - 1CD
Molsoft ICM-Pro v3.4-6c - 1CD
Parasoft SOA Test v4.5 - 1CD
SAM-LEAP5 v5.10D - 1CD
SAM-LEAP CLASSIC v6.2.4 - 1CD
Shade v8.5.1 Vitrea 2 v3.7 - 1CD
MSC SUPERFORGE v2005 MP1 - 1CD
CST Studio Suite v2006 - 1 DVD
CYME CYMCAP v4.2.R3 - 1CD
CYME CYMDIST v4.1.R21 - 1CD
CYME CYMGRD v6.3.R3 - 1CD
CYME CYMTCC v4.4.R8 - 1CD
CYME PSAF v2.81 R2.9 - 1CD
OPENMIND hyperCAD 2005.1_8.12.2005 Multilanguage - 1CD
OPENMIND HyperMILL v9.0 Include SP4 HF 29087 Multilanguage - 1CD
FORMSYS MAXSURF v11.11 - 1CD
EPCON Engineers Aide Toolbox v7.0 - 1CD
EPCON API Technical Databook v7.0 - 1CD
EPCON AIDE SiNET v7.0 - 1CD
*** Pipeline Network Analysis and Process Equipment Sizing and
Troubleshooting Software ***
EPCON SYSTEM Process Explorer v7.0 - 1CD
*** Process Simulation Software ***
Epcon Chempro Engineering Suite 6.31 - 1CD
[APITech Database v3.0, Chempro v6.31, Epcon Environ v2.0 and Epcon
SINET v6.11]
Epcon Environ v2.0 - 1CD
*** Enviornment, Health and Safety Analysis Software ***
BricsCad Architecturals v4.1.0027 for AutoCAD - 1CD
BricsCad Architecturals v4.1.0027 for BricsCad - 1CD
BricsCad Pro v6.2.0024 BricsCad Structural Frames v2.1.0004 - 1CD
SolidCAM 2006 R10 SP9 for SolidWorks - 1CD
UGS TECNOMATIX EM-POWER v7.5 - 1CD
PTC Expert Moldbase Extension v5.0 - 2CDs
PTC Progressive Die v2.2 - 1CD
HYDROFLO v1.2 - 1CD

------------------------------------------------------------------------
---------------------------------------------

ABSOFT Fortran 8.0 1 CD
ACCELRYS Materials Studio v3.2 1CD
ACECAD StruCAD v10.1 - 1CD
ACTEL Designer v6.2 - 1CD
ACTIFY SPINFIRE Complete Pro v2004 - 1CD
ADAPCO STARCD v3.2 - 1CD (For Linux)
ADAPCO STARCD v3.22 - 1CD (For Windows NT)
ADAPTSOFT Adapt Builder v1.54 - 1CD
ADAPTSOFT Adapt PT v7.1 1CD
ADAPTSOFT ADAPT BUILDER EX BUILD 3 - 1CD
ADAPTSOFT ADAPT PT v7.10.3 - 1CD
ADINA SYSTEM v8.1 - 1CD
AEA TECHNOLOGY HYPROTECH Distil v5.0 - 1CD
AGILENT Vee Pro v7.5 - 1CD
AGILENT Advanced Design System (ADS) v2004A - 2CDs
Air Humid Handling v2004 - 1CD
ALGOR FEA v16 - 1CD
ALGOR Designcheck v19.1- 1CD
ALIAS Studio Tools v12.0 - 2CD
ALIAS I-Tools v3.5 1CD
ALIAS Maya v7.0 Unlimited - 4CDs
ALIAS MotionBuilder v7.0 1CD + 1DVD
ALIAS PIPING SOLUTIONS I-Run v3.44 1CD
ALIAS PIPING SOLUTIONS I-View v2.40 1CD
ALIAS I-Sketch v2.5.1.2 1CD
ALIAS Spoolgen v5.0.1.6 1CD
Alias ImageStudio v3.0 - 1CD
Alias Portfoliowall v3.0 - 1CD
Alldata v8.0 Install CD 1CD
Alldata v8.0 Audi CD 1CD
Alldata v8.0 Volvo CD Set 4CDs
Alldata v2004 GM DVDs 4DVDs + 1CD
Altera Quartus II v5.1 - 1CD
ALTURION GPS Professional v6.0 - 2CD
ALTAIR Hyperworks v7.0 - 1CD
ALTAIR Hyperworks v7.0 Service Pack 1 Update - 1CD
ALTIUM DXP Suite v2004 SP2 1CD
ANSOFT Simplore v6.0 - 2CDs
ANSOFT ePhysics - 1CD
ANSOFT Maxwell EM v10 - 1CD
ANSOFT HFSS v10.0 - 1CD
*** Software for Electromagnetic Simulation of High-Frequency and
High-Speed Components ***
ANSYS DESIGNSPACE v10.0 - 1CD
ANSYS Multiphysics 10.0 - 3CDs (Win/Linux/LinuxIA64)
ANSYS WorkBench Suite v10.0 - 2CDs (Win/Linux)
ANSYS MULTIPHYSICS v10.0 with Service Pack 1 1CD
ANSYS WORKBENCH v10.0 with Service Pack 1 - 1CD
ANSYS ICEM CFD v10.0 3CDs (Win/LinuxIA64/LinuxAMD64)
ANSYS CFX v10.0 4CDs (Win/Linux/LinuxIA64/LinuxAMD64)
ANSYS Turbogrid v10.0 2CD (Win/Linux) [Need ANSYS WorkBench Suite
v10.0]
ANSYS Blademodeler v10.0 - 1CD
ANSYS Heal v8.1 - 1CD
ANSYS Paramesh v3.0 - 1CD
ANSYS CFX RIF v1.4.1 - 1CD
ANSYS CFX Tascflow v2.12.2 (NT/XP) - 2CD (CD1: For NT CD2: For XP
Professional)
ANSYS CFX Bladegen Plus v4.1.10 - 1CD
APPLIED FLOW TECHNOLOGY Mercury v5.5.2005.02.03 - 1CD
APPLIED FLOW TECHNOLOGY Impulse v3.0.2005.02.03 - 1CD
APPLIED FLOW TECHNOLOGY Fathom v6.0.2005.02.03 - 1CD
APPLIED FLOW TECHNOLOGY Arrow v3.0.2005.02.09 - 1CD
APPLIED FLOW TECHNOLOGY Titan v3.0.2005.02.02 - 1CD
ASPEN ICARUS Products v12.0 - 1CD
ASPENONE ASPEN ENGINNERING Suite v2004 - 6 CDs
[Aspen ACOL, Aspen Adsim, Aspen Aerotran, Aspen APLE, Aspen
AssetBuilder, Aspen Batch Plus, Aspen BatchCAD, Aspen CatRef, Aspen
Chromatography, Aspen COMThermo, Aspen Custom Modeler, Aspen DISTIL,
Aspen Dynamics,Aspen FCC, Aspen FIHR, Aspen FLARENET, Aspen FRAN,
Aspen Hetran, Aspen HTFS Research Network, Aspen HX-Net, Aspen
Hydrocracker, Aspen Hydrotreater, Aspen HYSYS, Aspen Icarus Process
Evaluator, Aspen Icarus Project Manager, Aspen MUSE, Aspen PIPE,
Aspen OLI Interface, Aspen Plus, Aspen Polymers Plus, Aspen Process
Manual,Aspen Process Tools, Aspen ProFES , Aspen Properties, Aspen
RefSYS, Aspen Richardson Rbooks, Aspen Richardson WinRace Database,
Aspen Split, Aspen TASC, Aspen Teams, Aspen TICP, Aspen Zyqad]
Aspen Engineering Suite v12.1 - 3CDs
ASPENTECH HTFS v2004 (with manuals) 1CD
[ Aspen ACOL, Aspen FIHR, Aspen APLE, Aspen MUSE, Aspen PIPE,
Aspen TASC]
ASPENONE ASPEN HYSYS v2004 (with Manuals) 1CD
ASPENONE ASPEN PLUS v2004 (with Manuals) - 1CD
ASPENONE B-Jac 2004 - 1CD
ASPENONE ASPEN DISTIL, HX-NET and SPLIT 2004 (with Manuals) - 1CD
ASPENONE ASPEN Flarenet v2004 (with Manuals) - 1CD
ASPENTECH ASPEN PIMS v2004 1CD
ASPENONE ASPEN ICARUS v2004 (with manuals) - 1CD
ATLAST SOFTWARE Sketchup.v5.0.232 - 1CD
ATIR STRAP v12.0 - 1CD
AUTODATA v5.5.0.0 Multilanguage 2CDs
AUTODESK AUTOCAD v2007 - 2CDs
AUTODESK AutoCAD 2006 Spanish - 1CD
AUTODESK AutoCAD 2006 Italian - 1CD
AUTODESK Building System 2006 1DVD
AUTODESK Revit Building v8.1 - 1CD
AUTODESK Inventor Series 10.0 - 1 DVD
AUTODESK Inventor v8.0 Professional Spanish - 2CDs
AUTODESK Inventor Professional 10.0 1DVD or 6 CDs
AUTODESK Inventor v9.0 Design Accelerator Preview 1CD
AUTODESK AutoCAD LT 2005 - 1CD
AUTODESK AutoCAD Mechanical 2006 - 1CD
AUTODESK AutoCAD Electrical 2006 - 1CD
AUTODESK Vault v4.0 - 1CD
AUTODESK Map3D 2006 - 3CDs
AUTODESK Map 2004 - 1CD
AUTODESK Architectural Desktop 2006 - 3CDs
AUTODESK Architectural Desktop 2005 1DVD (Spanish)
AUTODESK Architectural Desktop 2004 Spanish - 2CDs
AUTODESK Mechanical Desktop 2006 - 1CD
AUTODESK Revit Series v7.0 - 1CD
AUTODESK REVIT STRUCTURE v2.0 - 1CD
AUTODESK Land Desktop 2006 - 2CDs
AUTODESK VIZ 2006 - 2CDs
AUTODESK Raster Design 2006 - 1CD
AUTODESK Civil Design 2005 - 1CD
AUTODESK Civil3D 2006 - 2CDs
AUTODESK Civil Design Companion v2006 - 1CD
AUTODESK Survey 2006 - 1CD
AUTODESK Onsite Enterprise v2.5 - 1CD
AUTODESK TOXIK 1.0 - 1DVD
AUTODESK LUSTRE v2.6 1CD
AUTOMATION Studio Pro Edition V5.0 - 1CD
AUTOMATIONWORX Software Suite v2004.25 Multilingual 1CD
AutoPOL for Windows v1.14 1CD
AUCOTEC Elcad Aucoplan v7.3 Multilanguage 1CD
AVID METASYNC v22.1 1CD
AVID SOFTIMAGE XSI v4.2 2CDs
AVID SOFTIMAGE XSI v4.2 Behavior Quickstart 1DVD
AVID XPRESS Pro HD v5.0.4 1CD
AVL FIRE v8.31 1CD

BENTLEY AutoPIPE Plus 2004 Edition v08.05.01.11 1CD
*** Piping Stress Analysis Software ***
BENTLEY AutoPLANT Plant Design 2004 Edition v8.05.00.32 1CD
BENTLEY AutoPLANT Structural 2004 Edition v8.06.00.11 - 1CD
BENTLEY Building Electrical System v8.05.03.10
BENTLEY Stuctural v8.05.03.62 1CD
BENTLEY Microstation Triforma v8.1 - 1CD
BENTLEY Microstation v8.05.02.35 - 1CD (2005 Edition)
BENTLEY Architecture v8.1 .1CD
BENTLEY Explorer 2004 Edition v8.5 - 1CD
BENTLEY InRoads Suite 2004 Edition v8.05 - 1CD
BENTLEY IRASB 2004 Edition v8.05 - 1CD
BENTLEY Architecture v8.05.02.13 - 1CD (2005 Edition)
BENTLEY MicroStation GeoGraphics v8.05.02.11 1CD
BENTLEY GEOPAK Civil Engineering Suite v8.05.02.35 1CD
BENTLEY MicroStation Civil Extension v2004 Edition 1CD
BENTLEY MicroStation TriForma v8.05.02.15 - 1CD (2005 Edition)
BENTLEY MX 2004 Edition - 1CD
BENTLEY HVAC v8.05.02.20 - 1CD (2005 Edition)
BENTLEY Stuctural v8.05.02.12 1CD (2005 Edition)
BENTLEY Process and Instrumentation 2004 Edition v8.06.00.14 - 1CD
BENTLEY Redline v8.05.02.35 - 1CD
BENTLEY Powerdraft v08.05.02.35 - 1CD
BENTLEY JPEG2000 Support for MicroStation v2.0 - 1CD
BLACK AND DECKER Everyday Home Repairs 1CD
BLUE RIDGE PARKWAY Screen Saver 1CD
BMW WDS v7.0 Multilanguage DVD 1DVD
BOBCAD-CAM and BOBART v20.4 - 1CD
BOBCAD-CAM v20.5 1CD
BOEING KORK Digital Mapping System v14.0 1CD
BOEING SOFTPLOTTER With Airfield v4.1 1CD
BOEING SOFTPLOTTER With Airfield v4.1 - 1CD
BOEING GIS Feature Collection Module v1.2 For BOEING SOFTPLOTTER v4.1 -
1CD
Brother PE Design v6.0 - 1CD
BricsCAD Architecturals v4.1.0015 For AutoCAD 1CD
BricsCAD Architecturals v4.1.0015 For BricsCAD 1CD
BricsCAD Pro v6.0.0006 1CD
BricsCAD Structural Frames v2.1.0003 1CD

CABINET VISION Solid v3.5 - 1CD
CADPIPE Suite 2002 v7.0 for AUTOCAD - 1 CD
[3D Design, Building Services, Commercial Pipe, HVAC, ISO, Ortho and
PID]
CADCAM-E Product - 1CD
CADCAME_Ugworks_Bidirectional_v1.1
CADCAME_Catemp_v1.0
CADCAME_Ciminv_CAT_v1.1
CADCAME_Ciminv_UG_v1.1
CADCAME_Cimpro_Bidirectional_v9.0
CADCAME_Cimpro_UG_v2.0
CADCAME_Cimug_Pro_v1.2
CADCAME_Igescat5_v1.1
CADCAME_Igescat_Bidirectional_v7.1
CADCAME_Igespro_v2.1
CADCAME_Igesug_v5.0
CADCAME_Pscat_Bidirectional_v2.2
CADCAME_Psstep_Bidirectional_v1.2
CADCAM-E CAT5WORKS v2.0 1CD
CADCAM-E PSCAT5 v2.2 1CD
CADCAM-E PSPRO v3.1 1CD
CADEM SeeNC Mill v6.1 - 1CD
CADEM SeeNC Turn v6.1 - 1CD
CADENCE OrCAD Unison Suite with Pspice v10.5 2CD s
Cadence Allegro Silicon Package Board v15.5.1 4CDs
CADKEY Workshop EX v21.52 - 1CD
CADFIX v7.0 - 1CD
CAMBRIDGESOFT Chemoffice Ultra v2005 - 1CD
CAMworks v2003 - 1CD
CD-ADAPCO GROUP Star-CCM Plus v1.0 1CD (For Windows NT/2000)
CD-ADAPCO GROUP Star-Design v4.0 For Star-CCM Plus 1CD (For Windows
NT/2000)
CD Adapco Star CD v3.26 1CD
CDLAB Wincan v7.3 MultiLanguage 1CD
CEI ENSIGHT GOLD v8.0 5A - 1CD
CEI HARPOON v1.3 - 1CD
CGTECH VeriCUT v5.4 - 1CD
CHIEF ARCHITECT v10.0 - 3CDs
CHIEF ARCHITECT VIDEO TRAINING PART1 - 3CDs
CHIEF ARCHITECT VIDEO TRAINING PART2 - 3CDs
CHIEF ARCHITECT Picture Painter v1.0 1CD
Chaos Systems TopoCAD v7.2.1 Multilingual - 1CD
CHVAC v7.01.11 - 1CD
CHEMSTATIONS ChemCad Suite v5.5 - 1CD
[CC-Steady State, CC-Dynamics, CC-Batch, CC-Therm, CC-Safety Net and
CC-Flash]
*** Process Simulation Software ***
ChemOffice Ultra 2006 v10 - 1CD
ChemMaths v9.0 - 1CD
ChemEng Software Equations v3.0 1CD
ChemEng Software DataPro v3.0 1CD
ChemEng Software ChemMaths v8.0 1CD
CIMCO DNCMax v4.40.09 - 1CD
CIMCO Edit v4.40.09 - 1CD
CIMCO SOFTWARE SUITE v5.02.19 - 1CD
CIMCO Edit v4.40.01 1CD
CIM-TEAM E3 SERIES v2004 - 1CD
CIM-TEAM E3 SERIES v2004.330 1CD
CIMATRON v13.1 - 1CD
CIMATRON ELITE v7.1 - 3CDs
CIMATRON QuickNC v4.1 - 1CD
CIMMETRY Autovue Solidmodel Professional v18.0 C6 Update 1CD
CIM-TEAM E3 SERIES v2004 - 1CD
CIMCO DNCMax v4.40.09 1CD
CIMCO Edit v4.40.09 1CD
COADE CAESAR II v4.50 - 1CD
*** Piping Stress Analysis Software ***
COADE PVElite v2005 - 1CD
COADE CADWorx Equipment v2006 1CD
COADE CADWorx PI&D v2006 1CD
COADE CADWorx Plant Professional v2006 1CD
COADE CADWorx Steel v2006 1CD
COADE CADWorx IP v2005 - 1CD
COADE TANK v2.5 - 1CD
Codeware Compress Build 6245 1CD
Codeware Coster 1CD
Codeware Drafter 1CD
Codeware Tube Layout 1CD
CODE V v9.50 1CD
CODE COMPOSER Studio C6000 v2.21 - 1CD
COMSOL FEMLAB v3.1 - 3CDs
Chemical Engineering For COMSOL FEMLAB v3.1 1CD
Earth Science For COMSOL FEMLAB v3.1 1CD
Electromagnetics For COMSOL FEMLAB v3.1 1CD
Heat Transfer For COMSOL FEMLAB v3.1 1CD
Mems For COMSOL FEMLAB v3.1 1CD
Structural Mechanics For COMSOL FEMLAB v3.1 1CD
COMSOL Multiphysics v3.2 - 4CDs
COMPUSOFT Winner v6.0.a1 Multilingual - 1CD
CORELDRAW Graphics Suite X3 v13.0 4CDs
CORBIS BUSINESS 5 - 1CD
CORBIS BUSINESS TEAMS - 1CD
CORBIS FOUR ELEMENTS - 1CD
CORBIS ON THE ROAD - 1CD
CORBIS WORLD PANORAMAS - 1CD
CRYSTAL GRAPHICS PowerPlugs Transitions Volume I to III for PowerPoint
1CD
CRYSTAL GRAPHICS PowerPlugs Templates V 1CD
CRYSTAL GRAPHICS PowerPlugs Templates VI 1CD
CRYSTAL GRAPHICS PowerPlugs Slides That Win 1CD
CRYSTAL REPORTS Professional Edition v11 1CD
CRTECH Sinapsplus v4.7 1CD
CRTECH Thermal Desktop v4.7 1CD
CSC Orion R13.2-C0 - 1CD
CSC TEDDS v8.0 - 1CD
CSC FASTRAK v9.0 - 1CD
CSI SAP2000 v10.0.1
CSI ETABS2000 Nonlinear v8.5
CSI Section Builder v8.1.0 - 1CD
CSI Safe v8.0.3 - 1CD
CST EM-STUDIO v2.0 - 1CD
CST DESIGN STUDIO v3.0 - 1CD
CYPECAD v2003 2D - 1CD
C++ Compiler v9.0.022 - 1CD (Intel) 1CD

DASSAULT SYSTEMES CATIA v5r15 SP5 - 1CD
DASSAULT SYSTEMES CATIA P2 v5r16 MULTiLANGUAGE - 2CDs
DASSAULT SYSTEMES Catia v5r15 Service Pack 1 - 1CD
DASSAULT SYSTEMES Catia v5r15 Service Pack 2 - 2CDs
DASSAULT SYSTEMES Solidworks 2006 Multilanguage 4CDs
DASSAULT SYSTEMES Catia v5r15 P3 - 2CDs
DASSAULT SYSTEMES Catia v5r15 P3 Documentation - 6CDs
DASSAULT SYSTEMES Catia v5r15 Service Pack 1 - 1CD
DASSAULT SYSTEMES Catia v5r14 P3 Documentation - 4CDs
DASSAULT SYSTEMES Catia v5r14 Service Pack 5 - 1CD
DASSAULT SYSTEMES Delmia v5r14 - 2CDs
DASSAULT SYSTEMES Delmia v5r14 Documentation - 3CDs
DASSAULT SYSTEMES Delmia Multicax v5r14 - 1CD
DASSAULT SYSTEMES Enovia 3D COM v5r14 - 1CDs
DASSAULT SYSTEMES Enovia 3D COM v5r14 Documentation - 2CDs
DASSAULT SYSTEMES CAA Catia v5r14 - 1CD
DASSAULT SYSTEMES Catia Enovia Multicax v5r14 - 1CD
DASSAULT SYSTEMES Enovia DMU Navigator v5r14 - 1CD
DASSAULT SYSTEMES Enovia VPM Navigator v5r14 - 1CD
DASSAULT SYSTEMES User Companion for Mechanical Design v5r13 - 2CDs
(Tutorials)
DASSAULT SYSTEMES User Companion for Hybrid Design v5r13 - 1CD
(Tutorials)
DASSAULT SYSTEMES User Companion for Sheetmetal v5r13 - 1CD (Tutorials)
DASSAULT SYSTEMES User Companion for DMU v5r13 - 1CD (Tutorials)
DASSAULT SYSTEMES User Companion for Structural Analysis v5r13 - 1CD
(Tutorials)
DASSAULT SYSTEMES User Companion for Extended Structural Analysis v5r13
- 1CD (Tutorials)
DASSAULT SYSTEMES Solidworks 2005 Multilanguage - 3CDs
DASSAULT SYSTEMES Solidwork 2005 Toolbox - 2CDs
CADTECH SolidCAM 2003 v8.2.7 for SolidWorks - 1CD (English and German)
CADTECH SolidCAM 2005 v9.2 with Service Pack 4 - 1CD (English and
Russian)
MOLDWORKS v2004 SP1 for SolidWorks v2004 - 1CD
MSC SIMDESIGNER v2004 R2 for CATIA v5r12 - 1CD
MSC SIMDESIGNER v2004 R3 for CATIA v5r13 - 1CD
MSC SIMDESIGNER v2004 R4 for CATIA v5r13 - 1CD
MSC SIMDESIGNER v2005 R1 for CATIA v5r13 - 1CD
MSC SIMDESIGNER SUSPENSION v2004 R3 for CATIA v5r13 - 1CD
SPLITWORKS v2004 for SolidWorks v2004 - 1CD
DELCAM ARTCAM INSIGNIA v3.6 - 1CD
DELCAM ArtCAM Pro and Jewelsmith v8.1 1CD
DELCAM PowerShape v5.7.30 - 1CD
DELCAM PowerMill v6.008 with Service Pack 1 - 1CD
DELCAM ArtCAM Pro v8.0 - 1CD
DELCAM ArtCAM Jewelsmith v7.1 1CD
DELCAM CopyCAD v6 - 1CD
DELCAM FEATURECAM 2006 v12.2.0.11 - 1CD
DEFORM 3D v5.03 - 1CD
DEFORM 2D v8.02 - 1CD
DESIGN DATA SDS2 v6.329 - 3 CDs
DesignCAD 3D Max 15 - 1CD
DESKPROTO v4.0 - 1CD
DISCREET 3D Studio Max v8.0 1DVD
DISCREET Combustion Unplugged v2005 1CD
DISCREET Combustion v4.0 2CDs
DIGITAL TUTORS Fundamentals Of Maya UV Layaut 2CD
DIGITAL TUTORS Maya Photorealistic Car Modeling and Addon Kit Bundle
Set I 2CDs
DIGITAL TUTORS Maya Photorealistic Car Modeling and Addon Kit Bundle
Set II 3CDs
DIGITAL TUTORS Ultimate Fluids - 1CD
DIGITAL TUTORS Building Advanced Shading Networks - 1CD
DIGITAL TUTORS Principles Of Photoshop Cs - 1CD
DIMENSIONAL SOLUTIONS Foundation3D v3.8.6 - 1CD
DIMENSIONAL SOLUTIONS Combined3D v3.8.0 - 1CD
DIMENSIONAL SOLUTIONS Mat3D v3.8.4 - 1CD
DIMENSIONAL SOLUTIONS Shaft3D v2.5 - 1CD
DIMENSIONAL SOLUTIONS DSANCHOR v2.5.0 1CD
DOLPHIN SMASH v5.4 1CD
DOLPHIN SOCGDS v5.5 1CD
Dosch Design 3D Shop Design 1CD (Only 3D Models)
Dosch LayerFX AUTOmotion 1DVD
DP TECHNOLOGY ESPRIT v2006 1CD
DRAFIX Pro Landscape v11.2 3CDs
DSC GOSTEEL v5.0 Service Pack 5 For AUTOCAD 1CD
DLUBAL RSTAB v5.14.321 BiLiNGUAL - 1CD
DYNASIM Dymola v5.3D 1CD
DYNAFORM PC v5.0 - 1CD

EAGLEWARE Genesys v2004.07 1CD
EARTH RESOURCE MAPPING INC Er Mapper v6.4 - 1CD
ERDAS IMAGINE v8.7 with LPS v8.7 6CDs
EGS FeatureCam 2005 v11.4.0.19 1CD
EGS FeatureCam 2005 v11.4.0.19 Catia v5 Plugin 1CD
EGS FeatureCam 2005 v11.4.0.19 Solid Edge Plugin 1CD
EGS FeatureCam 2005 v11.4.0.19 Solid Plugin 1CD
EGS SolidEdge And Catia v5 Plugins For FeatureCAM 2004 v11.2.0.23 - 1CD
EINGANA v1.5 Multilanguage 2CDs
ELECTRONICS WORKBENCH Multisim v8.0.43 - 1CD
ELITE SOFTWARE DPipe v2.00.13 - 1CD
ELITE SOFTWARE SPipe v2.00.24 - 1CD
ELITE SOFTWARE Fire v6.0.173 - 1CD
ELITE SOFTWARE GasVent v2.09 - 1CD
ELITE SOFTWARE HTools v3.2.14 - 1CD
ELITE SOFTWARE Chvac v7.01.32 - 1CD
ELITE SOFTWARE Rhvac v8.01.93 - 1CD
ELITE SOFTWARE Audit v7.01.156 - 1CD
ELITE SOFTWARE Ductsize v6.01.174 - 1CD
ELITE SOFTWARE Refrig v3.00.62 - 1CD
ELITE SOFTWARE ECA v4.011 - 1CD
EliteCAD Architektur v10.1 SP1 Multilanguage 1CD
EMS-I GMS v6.0 Datacode 22112005 - 1CD
EMS-I WMS v7.1 Datacode 09082005 - 1CD
EMS-I SMS v9.0 Datacode 09282005 - 1CD
ENVIROWARE FLARES v1.0 - 1CD
ENGINEERED SOFTWARE Pump Flo 2004 v9.0 - 1CD
ENGINEERING DYNAMICS SACS v5.1.06 - 1CD
EON Studio v5.2 - 1CD
Eovia Carrara v5.0 - 2CDs
ESI Group PAM-STAMP 2G v2003 - 2CD (CD1: Windows Version CD2: Unix
Version)
ESI Group AUTOSEA2 2004 v2.5.0.8 - 1CD
ESI PROCAST v2004.0 1CD
ESRD StressCheck v7.0 - 1CD
ESRI ArcGIS Desktop v9.1 1CD
ESPRIT CAM v2003 - 1CD
ESKO GRAPHICS ArtiosCAD v6.02 - 1CD
ETA Dynaform v5.2 - 1CD
ETAP POWERSTATION v4.0 1CD
ETOS v3.1.14.08 Multilanguage 1CD
EZ-CAM EZ-Mill Turn Pro v14.5 - 1CD

FASTSHIP v6.1 - CD
FE-DESIGN Tosca v5.0 - 1CD
FE-SAFE v5.0 1CD
FEM DESIGN v5.21 - 1CD
FIDES Suite 2005 (July 2005) Bilingual 1CD
FIDES Arw v2005.076 Bilingual 1CD
FIDES Bearing Capacity v2004.219 Bilingual 1CD
FIDES Earth Pressure v2004.219 Bilingual 1CD
FIDES Geo Planning v2004.313 Bilingual 1CD
FIDES KEA v2004.322 Bilingual 1CD
FIDES PILEpro FEM v2004.313 Bilingual 1CD
FIDES Settlement 2.5D v2004.329 Bilingual 1CD
FIDES Settlement v2004.219 Bilingual 1CD
FIDES SlipCircle v2004.257 Bilingual 1CD
FIDES Twist v2005.060 Bilingual 1CD
FIDES WinTUBE v2004.116 Bilingual - 1CD
FIDES Walls v2004.099 Bilingual - 1CD
FIDES Walls Bemessung v2003.288 Bilingual - 1CD
FIDES Walls.FEM v2004.041 Bilingual - 1CD
FIDES Walls Dimensioning v2004.288 Bilingual 1CD
FIDES Walls FEA v2004.232 Bilingual 1CD
FIDES Drill v2004.092 Bilingual - 1CD
FIDES Erddruck v2004.041 Bilingual 1CD
FIDES Flow v2004.036 Bilingual - 1CD
FIDES Gleitkreis v2004.041 Bilingual - 1CD
FIDES Grundbruch v2004.041 Bilingual - 1CD
FIDES KEM v2004.041 Bilingual - 1CD
FIDES Setzung.25D v2004.042 Bilingual - 1CD
FIDES Setzung v2004.041 Bilingual - 1CD
FIDES SteelCON v2003.308b Bilingual - 1CD
FIDES WinIGEL v2004.043 Bilingual - 1CD
FIDES WinIGEL 3D v2004.313 Bilingual - 1CD
FlexPde Professional 3D v5.0.3 - 1CD
FLOW SCIENCE Flow 3D 8.11 - 1CD
FLOWMASTER2 v6.4.1 - 1CD
FLUENT FlowLAB v1.2.10 (Win/Linux) 1CD
FLUENT MixSim v2.0.2 (Win/Linux) 1CD
FLUENT v6.1 - 2CDs
FLUENT v6.1, Manual and Tutorials Guide, (PDFs) -1CD
FLUENT v6.2.16 - 2CDs
Fluent for CATIA v5.v1.0.8 1CD
FLUENT Icepack v4.0 - 1CD
FLUENT Airpack v2.06 - 1CD
FLUENT PolyFlow v3.92 .1CD
FLUENT TGrid v3.5.4 .1CD
FLUENT Fidap v8.7.0 - 1CD
FLUENT Gambit 2.1.2 User Manual, (PDFs) - 1CD
FLUENT Gambit v2.2 (Win/Linux) - 1CD
FLUENT Flow Wizard v1.0.8 - 1CD
FORMSYS MAXSURF Suite v11 - 1CD
FormZ RadioZity v5.5 - 1CD
FTI Fastform Advanced v10.2 - 1CD
FTI Fastform Advanced v10.3 - 1CD
FTI Fastblank v5.3 - 1CD
FTI Blanknest v5.0 - 1CD
FTI Blankworks v2.2 - 1CD

GAMMATECH GT Suite v6.1 - 1CD
GENSTAT v8.1 1CD
GIBBSCAM 2005 v7.7 1CD
GRAPHICODE PowerPlatform v4.1.4 - 1CD
GRAPHISOFT ARCHIGLAZING for ARCHICAD v9.0 - 1CD
GRAPHISOFT ARCHICAD v9.0 R1 International 2CDs
CIGRAPH FACTORY v2005 for ARCHICAD v9.0 Hybrid 1CD
GRAPHICODE PowerPlatform v4.2.2 - 1CD
GRAITEC Advance v5.2 2CDs
GRAITEC Advance Steel Suite v5.2 1CD
GRAITEC OMD v12.1H 1CD
GT STRUDL v27 - 1CD

HAESTAD METHODS WaterCAD v6.5120n - 1CD
HAESTAD FLOWMASTER v2005 - 1CD
Hampson Russell CE v7.R3.2 - 2CDs (Win/Linux)
HEIDELBERG Signastation v8.0.1 - 1CD
HKS ABAQUS v6.5-1 2CDs
HKS ABAQUS v6.5-1 Documentation 1CD
HONEYWELL UniSim Design R350.1 build 11051 - 1CD
*** Process Simulation Software - New version of HYSYS ***
HP Openview Storage Data Protector v5.5 1CD
HTFS v2001 1CD
HTFS v2003 1CD (Acol v6.30 Fihr v2.10 Tasc v5.10)
HTRI Xchanger Suite v4.0 - 1CD
[ Xace , Xfh , Xhpe , Xist , Xjpe , Xphe , Xtlo , and Xvib ]
*** All types of Heat Exchanger Design Software ***
Hummingbird Exceed v9.0 - 1CD
Hummingbird Exceed 3D v9.0 - 1CD
Hummingbird Docsopen Enterprise v4.0 - 1CD
HYDPRO v1.2.19 1CD

ICEM Surf v4.5 - 2CDs
IDRISI Kilimanjaro v14.0.1 - 1CD
ILIGHT FIELDVIEW v11 - 2CDs
IMAGEWARE Unilet Pro v6.0.5 Multilingual 1CD
IMSI FLOORPLAN 3D Design Suite v9.0 1CD
IMSI TurboCAD Professional v12 - CD
IINUS Technology RapidForm v2004 - 1CD
INUS Technology RapidForm v2004 Plus Pack 2 - 1CD
INSTALLSHIELD X Premier Edition v10.5 - 1CD
INSTALLSHIELD X Premier Edition v10.5 SP1 - 1CD
INTELLIGENT LIGHT Fieldview v10.0 2CDs
INTERGRAPH Smartsketch v5.00.21 1CD
INTERGRAPH Intools v5.2 1CD
Intel C Plus Plus Compiler v9.0.028 - 1CD
Intel Visual Fortran Compiler v9.0.028 - 1CD
INTUIT TurboTax Premier 2004 WinMac 1CD
INTUIT QuickTax 2004 Platinum Canadian 1CD
INVENSYS SIMSCI Pro/II v7.1 - 1CD
*** Process Simulation Software ***
INVENSYS SIMSCI DYNSIM v4.0 1CD
INVENSYS SIMSCI Pipephase v9.0 - 1CD
IRONCAD v8.0 1CD
ITEDO IsoDRAW v6.0 - 1CD
ITASCA FLAC3D v3.0 1CD
ITT Promedia 2005 v.8.0 1CD

KEIL Development C51 C251 C166 Tools v2004 1CD
KEPLER v7.0 1CD
KUBOTEK KeyCreator v3.0.2 Multilanguage 1CD
KURV STUDIOS LightWAVE3D Industrial Modeling Series Product Creation
Vol1 1CD

LECTRA KALEDO Color Management v1R1c3 - 1CD
LECTRA KALEDO Style v1R1c9 Multilingual - 1CD
LECTRA KALEDO Style v1R1c11 Multilingual - 1CD
LECTRA U4IA GRAPHIC v7R1C10 - 1CD
LECTRA Catalog v2.1C1 - 1CD
LECTRA Vectorpilot v2R2C1 - 1CD
LECTRA Formaris Furniture v5R1 Multilingual - 1CD
LECTRA Graphicspec Furniture v2R5 - 1CD
LECTRA Focuspilot v2R2C1 - 1CD
LECTRA Leather v3R1 Multilingual 1CD
Lectra Diamino Furniture v5R2 Multilanguage - 1CD
Lectra Diamino TechTex v5R2 Multilanguage - 1CD
Lectra Diamino Footwear v5R2 Multilanguage - 1CD
LICOM SYSTEMS ALPHACAM v2004 - 1CD
LIZARDTECH Geoexpress v4.0 - 1CD
LMS SYSNOISE v5.6 - 1CD
LMS FALANCS v2.13 1CD
LMS TEST.LAB v4.0 1CD
LS-DYNA v970.6763 PARALLEL DOUBLE 1CD
LUSAS FEA v13.57 - 1CD

MACROVISION FLEXNET ADMIN STUDIO v7.0 - 1CD
MACROVISION INSTALLSHIELD PREMIER v11.5 - 1CD
MapInfo MapXtreme 2005 v6.5.0.362
MAPLESOFT MAPLE v10.0 for MacOSX - 1CD
MAPLESOFT MAPLE v9.1 - 1CD
MAPLESOFT MAPLE v9.5 HYBRID - 1CD
MAPLESOFT Maple v10.02 UPDATE
MAK SOFTWARE SUITE v4.0 1CD
MAK PVD v2.7 1CD
MAK RTI v2.2 1CD
MAK Data Logger v3.9A 1CD
MAK VR-Link v3.9.1 1CD
MAK Gateway v4.1.1 1CD
MaxonForm v9.103 For Archicad 1CD
MASTERCAM X v10.0 - 1CD
Mathworks Matlab R2006a - 3CDs
MATLAB 6.5.1 (Release 13SP1) Manual, (PDFs) - 1CD
MathXpert Calculus Assistant v3.02 1CD
MATHSOFT MATHCAD v13.0 Enterprise Edition 1CD
MATRIX42 Empirum Pro v2005 SR3 1CD
MAXSURF v9.52 Suite 1CD
MENTOR Graphics WG v2004 - 1CD
MENTOR Graphics SDD v2004 - 1CD
MENTOR GRAPHICS ISD 2004 SP4 - 3CDs
MENTOR GRAPHICS Expedition Suite v2005 1DVD
Mentor Graphics HyperLynx v7.5 - 1CD
MENTOR Graphics Integrated Systems Design 2004 with Service Pack 2
3CDs
MENTOR Graphics HyperLynx v7.5 1CD
MENTOR PADS PCB Design Solutions v2005 - 1CD
MENTOR PADS PCB Design Solutions v2005 Service Pack 1 (Update) 1CD
MENTOR Graphics Integrated Systems Design 2004 with Service Pack 2 -
3CDs
Meta Cut Utilities v3.0 - 1CD
MICROPROTOL v32.4 - 1CD
*** Heat Exchanger Design Software ***
MICROSTRAN v8.0 1CD
MIDAS CIVIL v6.3 - 1CD
MIDAS SET v3.2.1 - 1CD
Mimaki FineCut 5.2 for CorelDRAW Multilanguage - 1CD
Mimaki FineCut 6.2 for Adobe Illustrator_Multilanguage - 1CD
MINITAB v14.12 1CD
MISSLER TopSolid 2005 v6.6 (252) - 1CD
Modeling A Head Cinema 4D Training 2CDs
MOLDFLOW Plastics Advisers MPA v7.1 R1 - 1CD
MOLDFLOW Plastics Insight MPI v5.0 R1 - 1CD
MOLDFLOW Design Link v5.1 - 1CD
MOLDFLOW Dynamic 9.5 - 1CD
MOLDFLOW Works v1.1 R1 1CD
MOLDFLOW CAD DOCTOR V1.0 - 1CD
MSC Patran v2005 Release 2 - 3CDs
MSC FEA MSC AFEA v2005 R2 - 1CD
MSC Marc v2005 R2 - 2CDs
MSC AFEA v2004 - 1CD
MSC Adams 2005 - 2CDs (Windows)
MSC Adams 2005 - 1CD (Linux)
MSC Documentation 2005 1CD (for MSC.Nastran - MSC.Patran - MSC.Marc -
MSC.Dytran)
MSC Dytran v2005 - 1CD
MSC EASY5 v2004 - 1CD
MSC Enterprise Mvision v2004 - 1CD
MSC Fatigue v2005 for Patran - 1CD
MSC Interactive Physics v2004 - 1CD
MSC Marc v2005 - 1CD
MSC Nastran v2004 - 1CD
MSC Nastran v2004 Release 2 - 1CD
MSC Nastran v2004 Release 3 - 1CD
MSC NASTRAN For Windows v2004 R1 1CD
MSC Nastran v2005 - 1CD
MSC ROBUSTDESIGN v2004 R3.5 1CD
MSC SIMDESIGNER v2005 R2 for CATIA v5r14 1CD
MSC SIMDESIGNER SUSPENSION v2004 R3 for CATIA v5r13 - 1CD
MSC SuperForm v2005 1CD
M SC Visual Nastran Desktop v2004 - 1CD
MSC Visual Nastran Desktop v2004 with Service Pack 1 - 1CD
MSC Visual Nastran Desktop v2004 with Service Pack 2 - 1CD
NE Nastran Engine v8.3.1 - 1CD
NE Nastran Modeler v8.3.0 - 1CD

NATIONAL INSTRUMENTS LabVIEW v6.1 - 1CD
NATIONAL INSTRUMENTS LabVIEW Application Builder v6.1 - 1CD
NATIONAL INSTRUMENTS LabVIEW v7.0 - 2CDs
NATIONAL INSTRUMENTS Vision v8.0 Development Module - 1CD
NATIONAL INSTRUMENTS LabVIEW v7.1 Professional Development System - 1CD
NATIONAL INSTRUMENTS SignalExpress v1.2 Tektronix Edition 1CD
NATIONAL INSTRUMENTS IMAQ Vision Development Module for LabVIEW v7.0 -
1CD
NATIONAL INSTRUMENTS Vision Development Module for LabVIEW v7.1 - 1CD
NATIONAL INSTRUMENTS IMAQ for IEEE 1934 Cameras v2.0.1 - 1CD
NATIONAL INSTRUMENTS Teststand v3.1 - 1CD
NATIONAL INSTRUMENTS ECU MEASUREMENT AND CALIBRATION TOOLKIT v1.01 -
1CD
NATIONAL INSTRUMENTS Switch Executive v2.1 - 1CD
NATIONAL INSTRUMENTS DAQmx v8.0 - 1CD
NATIONAL INSTRUMENTS Motion Assistant v1.3.0 1CD
NATIONAL INSTRUMENTS Motion v7.2 - 1CD
NATIONAL INSTRUMENTS VI Logger v2.0.1 - 1CD
NATIONAL INSTRUMENTS Vision Builder For Automated Inspection v2.6.1 -
1CD
NATIONAL INSTRUMENTS Measurement Studio Enterprise Edition v7.1 - 1CD
NATIONAL INSTRUMENTS DSP Module v1.0 1CD
NATIONAL INSTRUMENTS Lookout v6.02 - 1CD
NavisWorks Jetstream Multilanguage v4 - 1CD
NEMETSCHEK Vectorworks v11.0 HYBRID - 1CD
NEMETSCHEK Vectorworks v11.5 (Update v11.0 to v11.5) - 1CD
VECTORWORKS v12 for MAC OSX 3CDs
NAVISWORKS v3.6 - 1CD
NC GRAPHICS Depocam v6.0.9 - 1CD
NCSS 2004 And PASS 2005 v2.0.0.462 - 1CD
Nissan EPC v04.2005 - 1CD

OpenMind HyperCAD 2005.1_8.12.2005 Multilanguage - 1CD
OpenMind HyperMILL v9.0 Include SP4 HF 29087 Multilanguage - 1CD
OPENMIND Hypermill v5.2 - 1CD
OSLO Premium v6.2
Olga2000 v4.17.3 - 1CD

Palisade Decesion Tools v4.5.4 - 1CD
[@RISK 4.5 for Excel, BestFit 4.5, PrecisionTree 1.0 for Excel,
RISKview 4.5 and TopRank 1.5 for Excel]
*** Risk Management Software ***
PALOALTO BUSINESS Plan Pro v2005 Canadian Edition 1CD
PATHTRACE EdgeCAM v10.0 - 1CD
Paradigm Geolog v6.6 - 1CD
Paulin Reserach Group 2005 Software - 1CD
[Nozzle Pro 6.0, Mat Pro 1.0, Axi Pro 2.1, FE/Pipe v4.2, BOS Fluids
v4.2, Mesh Pro 2.0, Splash, Stress Plot 1.0 and Plas Plot 1.0]
PEACHTREE Complete Accounting v2005 1CD
PEACHTREE First Accounting v2005 1CD
PERI ELPOS v4.0 - 1CD
PERICAD 2006 FOR AUTODESK ARCHITECTURAL DESKTOP v2006 - 1CD
Petroleum Experts IPM v4.0 - 1CD
[GAP v5.04, MBAL v7.0, PRODMAN v5.04, PROSPER v8.01, PVTP v6.5,
RESOLVE 1.0, and REVEAL v1.0]
PHOENICS v3.5 - 1CD
Pipenet (with manuals) 1CD
[Spray v3.40 - Standard v3.40 - Transient v5.30]
Pipe FLOW3D v1.037 - 1CD
PIPING SYSTEMS FluidFlow v2.32 - 1CD
Plaxis Professional v8.2 -1CD
PROKON CalcPAD v2.0 - 1CD
POINTWISE Gridgen v15.06.R.01 1CD
PRESTO v8.65 - 1CD
PRIMAVERA Project Planner v3.1 - CD
PRIMAVERA Expedition v7.0 - 1CD
PROTEUS ENGINEERING MAESTRO v8.7 1CD
ProgeCAD v2006 Professional v6.16 - 1CD
ProgeARC v2006 For ProgeCAD 1CD
PTC Pro Engineer Wildfire v3.0 windows - 3CDs
PTC Progressive Die Extension v2.1 Code 2004030 - 1CD (For Pro/Engineer
Wildfire v2.0)
PTC Expert MoldBase Extension v4.1 Code 2004120 - 1CD (For Pro/Engineer
Wildfire v2.0)
PTC Pro/Engineer Routed Systems Designer 6.0 - 1CD
PTC Mold Expert for Pro/Engineer Wil.re 2003 Code 130 - 1CD
PTC Basic Library for Pro/Engineer WildFire - 1CD
PTC Connector Library for WildFire - 1CD
PTC Electrical Symbols Library for WildFire - 1CD
PTC Graphics Library for WildFire - 1CD
PTC MoldBase Library for WildFire - 1CD
PTC Piping and Heating Symbols Library for WildFire - 1CD
PTC Pipe Fitting Library for WildFire - 1CD
PTC Tooling Library for WildFire - 1CD
PTC Pro/CONCEPT 2.0 - 1CD
PTC INTRALINK v3.4 M011 1CD
PUNCH HOME DESIGN Architectural Series 4000 - 2CDs
PVTSim v15.0 - 1CD

RAINDROP GEOMAGIC Studio V7.0 2CDs
RAINDROP GEOMAGIC Cadmus Fashion v6.0 - 1CD
RAINDROP GEOMAGIC QUALIFY v8.0 - 2CDs
RAPID INTERACTIVE STRUCTURAL ANALYSIS 3D v5.5 (RISA 3D v5.5) - 1CD
RAM CONCEPT v1.2 - 1CD
RAM STRUCTURAL SYSTEM v8.13 1CD
REACTION DESIGN CHEMKIN v4.0 1CD
REBIS PlantFLOW v6.0 1CD
Reiworld Staad Beam v1.2 1CD
RETAINPRO v6 - 1CD
REIUSA Staad Pro 2005 - 1CD
REIUSA STAAD FOUNDATION v2.0 1CD
REVISIONFX Reflex v3.02 1CD
Robot Millennium v19.0 - 1DVD
ROCKWELL Arena v7.0 - 1CD
Rockworks 2004 v5.9.30 1CD
ROXAR IRAP RMS v7.4 - 1CD

S10 v2003 Profesional 1CD (Peruvian Software)
SAP R3 v4.6d - 2CD (Mini SAP R3 v4.6d)
SAP Web Application Server 620 3CDs (For Mini SAP)
SAS v9.0 - 6CDs
SCIA ESA PT v5.2.114 - 1CD
SEMCAD v8.1 - 1CD
SESCOI WorkNC v16.21 Multilanguage - 1CD
SERIF PagePlus v11 2CDs
Schlumberger Eclipse v2005A - 1CD
SCHLUMBERGER Pipesim 2003 v1.0 - 1CD
SCHLUMBERGER Petrel v2004 1CD
SIEMENS Sinutrain v6.3 Multilanguage - 1CD
SIEMENS Simatic WinCC Flexible v2005 Multilanguage - 2CDs
SIEMENS Simatic Step7 Professional Edition v2004 SR3 Multilanguage
2CDs
SIEMENS Simatic Step7 v5.3 SP3 Multilanguage 2CDs
SIGMA DESIGN Arris v8.3.103 1CD
SIMSCI Pipephase v8.1 - 1CD
SIMSCI Visual Flow.v4.1 - 1CD
SIMSCI Process Engineering Suite 2002 - 1CD
SIMSCI DataCon v3.13 - 1CD
SIMSCI HexTran v8.11 - 1CD
SIMSCI InPlant v 3.03 - 1CD
SPSS v13.0 - 1CD
SPSS Manual, (PDFs) - 1CD
SPICER Imagenation v7.50 WiN32 1CD
SRAC COSMOS Work Suite v2004 Multilanguage - 1CD
SRAC COSMOSWorks v2006 - 1CD
COSMOSMotion v2006 SP1 Multilingual - 1CD
COSMOSWorks v2006 - 1CD
COSMOSM v2.95 SP2 - 1CD
SRAC COSMOSFloWorks v2005 - 1CD
SRAC COSMOSMotion v2005 - 1CD
SRAC COSMOS DesignSTAR v4.5 1CD
STEINBICHLER Cometinspect v2.0 - 1CD
STEINBICHLER COMET T-Scan v4.2 - 1CD
STRAUS v7.0 1CD
STOCKBYTE 119 WEIGHT CONTROL - 1CD
SUPER FINSIM v7.0.14 - 1CD
SURFWARE SURFCAM VELOCITY v2005.SP1 - 1CD
SURFWARE SURFCAM v2005 with Service Pack 1 - 1CD
SYNAPTICAD Allproducts v10.05A 1CD
SYSTRAN Professional Premium v5.0 Multilanguage 1CD

TEBIS CADCAM v3.1R12 - 1CD
TECNOMATIX EM-Workplace v6.0.3 - 1CD
TECNOMATIX EM-Power v7.2 - 1CD
Tekla Xsteel Strcutures v11.0 - 1CD
THERMOANALYTICS RadTherm v7.01 - 1CD
Thermoflow Suite v13 2004 Edition 1CD
THINK3 ThinkDesign v2005.1 - 1CD
TOTAL 3D LANDSCAPE Deluxe 2005 v8 - 2CDs
TRACEPARTS v2.1.1 with SP2 - 1CD
TRACE Pro v3.2.2 - 1CD
TRANSLOGIC Ease v5.2 R9 and Eale v5.2 R8 1CD
TRANSLOGIC HDL Companion v1.1 R2 1CD
TransMagic Plus v2005 with Service Pack 4 - 1CD
TRUMPF Tops 600 v3.0 1CD
T-SYSTEMS Medina v7.4.4 1CD
T-Surf Gocad v2.1.2 - 1CD

UGS Unigraphics NX v4.00 2CDs
UGS UNIGRAPHICS NX V4.0.0.25 MP01 UPDATE ONLY - 1CD
UGS NASTRAN NX4 - 1CD
UGS CAST FOR NX4 - 1CD
UGS MOLDWIZARD NX 4.0 - 1CD
UGS Die Design Standard Part Library for Unigraphics NX v3.0 - 1CD
UGS Cast Unigraphics NX v3.0 - 1CD (Tutorials)
UGS Solid Edge v18
UGS TeamCenter Engineering iMAN v9.0 - 1CD
UGS TeamCenter Engineering iMAN Portal v8.1- 1CD
UGS TeamCenter Manufacturing v8.1 - 1CD
UGS Teamcenter Visualization v5.1 - 1CD
UGS Femap v9.0 1CD
UGS I-Deas v11.0 NX Series full - 6CDs
UGS I-Deas v11.0 NX Update M3 - 2CDs
UGS I-Deas v11.0 NX Series Update M1 - 4CDs
UGS Imageware v12.1 - 1CD
MECHSOFT Mechanical DesignPack for Unigraphics NX v2.0 - 1CD
MECHSOFT for SolidEdge v15 - 1CD
UTS Advanced Spring Design v6.0 1CD

VANTAGE AVEVA PDMS v11.6 - 1CD
VASCI AUTOSEA v2.3.1 1CD
VERO VISI CAD CAM Series v12.1 1CD
VERO MACHINING Strategist v6.1 1CD
Visual Fortran (Compaq) Professional v6.6 - 1CD
Visual Fortran Compiler (Intel) v9.0.018 1CD
Visual C++ v6.0 (Microsoft) Professional Edition - 1CD
VisualDisk M04 Woods 1CD (Only Photos about Woods with high
resolution)
VisualDisk N21 Trees 1CD
VisualDisk N17 Meadow 1CD
Visual Mill v5.08 - 1CD
VMWare Workstation v4.5.2 1CD
VMWare ESX Server v2.5.1 1CD
VMware VirtualCenter v1.3.1.SUB100 - 1CD
VTC Implementing A Windows Server 2003 Network Infrastructure 70.291
1CD
VTC Managing And Maintaining Windows Server 2003 70.290 - 1CD
VX CAD CAM v11.21 - 1CD

WATERCOM PIPES Plus Plus v2004.3 - 1CD
WATERCOM DRAINS v2004 - 1CD
WATERLOO HYDROGEOLOGIC Visual Modflow Pro v3.1
Wilcom v9.0 with Service Pack 3 1CD
WISE GerberTool v13 SR5 - 1CD
WOLFRAM RESEARCH Mathematica v5.1 - 1CD
WOLFRAM RESEARCH Mathematica V5.2 for MAC OSX 1CD
WRQ Reflections Suite v13 Multilanguage - 1CD

XP SWMM v9.5 - 1CD

YOSEMITE TECHNOLOGIES TapeWare v7.0 Multilingual - 1CD

Codes and Standards / Miscellaneous items

Acess of ASME / ANSI (American Society of Mechnical Engineers /
American National Standards Institute ) Standards; latest editions
Acess of API (American Petroleum Institute) Standards; latest editions
Acess of ASTM ( American Standard of Testing Materials) Standards;
latest editions
NFPA (National Fire Protection Association) Standards; latest editions
NACE ( National Association of Corrosion Engineers ) Standards; latest
editions
3D Total Textures - 15 CDs (Volume 1 to 15)

.........and much much more
See software and Price list here


E-Mail:
======

contact us at: software.problem.solution or
softwareps.team

when writing email to us, please let us know from where you got our
email adderess?

*=This is just for improving our service. Thanks for your cooperation.

Note:
=====

1) Dear Readers, do not put any replies here. SoftwarePS will not check
any replies here on the forum.

Please, use our email address: software.problem.solution,
softwareps.team

2) If you could not find any reply from us in your inbox.. Please, check
ur spam mail folder.

*** Sent via Developersdex ***
Minh Huynh (10-02-07, 09:04 AM)
*** Sent via Developersdex ***
hhw (10-06-07, 05:42 AM)
I'm interested with some software. please send me more info on price
and delivery charge.

*** Sent via Developersdex ***
Mohamed Shawky (10-06-07, 09:59 PM)
thanks for this new crack
but actually, what i need is the full version of comfar III + crack.
thanks for your kind cooperation

*** Sent via Developersdex ***
sp (10-08-07, 06:23 AM)
On Sep 20, 6:14 am, softwareps team <softwarepst> wrote:
[..]
> HYDROFLO v1.2 - 1CD
> ------------------------------------------------------------------------ ....
> read more »


I would like to get a copy of SIMSCI PRO/II v8.0 - 1CD. Please advise
how can I get a copy of this CD.
Regards,
SP
Hugo Nava (11-11-07, 06:11 PM)
HUGO NAVA (11-11-07, 06:15 PM)
candi0087 (11-14-07, 11:24 AM)
nghia hoang (11-15-07, 06:47 PM)
i can't find out the link of emeraude 2.42

*** Sent via Developersdex ***
Nik Amir (11-23-07, 12:17 PM)
ece 4.0

*** Sent via Developersdex ***
roschina (11-27-07, 02:38 AM)


HFSS v11.01 30/10/2007 include Upgrade 47Meg
Alinks 4.02 1/10/2007 39Meg



CST_SUITE_2008 62x75 mg ( DVD)
Sonnet Suite v11.52 Pro ( price more 8000USD)
~30M
~30M
~30M

a.the license in attachment is nodelocked and valid for hostid of
network card turned off.
b.
previous versions were protected much more stronger.
now we can do what we want. no integrity checks!
we can use NOLIC.COM (but some license file is needed only for
em.exe),
we can change daemon etc.
to use nodelocked local license with any hostid we can use
FlexHOST.com ...

Ansoft_HFSS_11_FINAL_licensed



Ansoft_Designer_3.5_licensed

Agilent_Genesys_2007.08

1 Replace agsl31.dll,
2 Use Agilent ADS-style Licensing,set Current ADS License Path to
license.dat:

FEATURE genesys_core agileesofd 2.8 31-dec-2050 uncounted
VENDOR_STRING="111111111111 : SSDDHSO IWZOFDD JLPDJAO WYUNDHV UUKWMAH
BRCRZDW SMCWMLP VSON" HOSTID=Internet=*.*.*.* ISSUER=Winworm
SIGN="028E 323A 4025 DAD4 CBA5 04C0 2E51 2FA4 210D 1CC8 FC01 D93F 5664
B088 CCFD 38C5 988F AF1F 5127 98D1 1FAE"
FEATURE genesys_filter agileesofd 2.8 31-dec-2050 uncounted
VENDOR_STRING="111111111111 : XNZWSLO ZBLWSGS VMJHHHH LBNEDFH LBWJKEW
EKGCRLT WFTFG1H EBPMOEQ H" HOSTID=Internet=*.*.*.* ISSUER=Winworm
SIGN="00A4 1D8E 591F E4E6 92AD EBE5 4C09 AB58 1AC6 FC1F 1903 02AD 5898
1C38 64BB 75CF BB0A A926 3ADB D466 11B1"

and etc.

LINMIC_6.4
Agilent Delivers AMDS 2007.4

1 setup Agilent_AMDS_2007.4;
2 backup \bin\agsl14.dllЈ¬use this agsl14.dll instead;
3 set env lm_license_file point to license.lic

2.concerns ADS2006upd3 (two disks approximately on 500М each), that he
successfully download, but in view of shortened coming traffic to
flood on powweb.com shall gradually.
Mician 6.5.1.287 4 July 2007
> *** NEW: SEMCAD X V13.0 Bernina released and licensed
> *** SPICE based EM Co-Simulation!
> *** ELF Solver; Optimizer 2; Metamaterials;
> *** >100x faster than others!


> download
> the latest version of our software from:
>
> - if you have a 32-bit machine, or
>
> - for the 64-bit version
> These links are for the Windows versions of the GUI and Solver.


Flomerics_Flotherm_7.2_uploading


agilent ADS2008
New Features in 2008:

FEATURE trans_dxf_flat_legacy agileesofd 2.8 31-dec-2050 uncounted
VENDOR_STRING="INTERNET=*.* : FDDJFRI GUTN1HU EYSSUAH PBCKLCW 1TFG1HN
GIXJLRE UUOGCHP FRDAQHK XFPAQCO TQNLF" HOSTID=INTERNET=*.*.*.*
ISSUER=Winworm SIGN="009A 70FC 2CEC 7E7F 0E16 5F87 A6F9 5C91 73EA B19E
5600 6C3A 0C8F 6FAD 932D 710C DCFE A759 F7AC B2CE 8392"

WASP-NET 6 etc.

on FTP
roschina

Sentaurus TCAD_2007.03_sp1


1. Sentaurus Workbench, Sentaurus Workbench Advanced, Sentaurus
Workbench Visualization;
2. Calibration Library
3. Sentaurus Structure Editor
4. Sentaurus Process
5. Sentaurus Device
6. Sentaurus TFM
7. Raphael.etc.

If we use SN=TK this is a temporary key good for no more than 60
days.
If we use SN=RK this is a revenue key that is perminant but requires
the license to pass extra steps including sssverify
How to use:

1. Use first my LicGen make your own license and save as synopsys.dat

2. Use modified sssverify.exe check synopsys.dat:
sssverify synopsys.dat
* You will get the SECRET DATA infomation

3. Run second KeyGen.exe ( ZWT)
* Input the same HOSTID as synopsys.dat into the HOSTID text
window
* Input the correct SECRET DATA from step 2, into the SECRET
DATA text window
* Generate the license.dat
* Copy the SSS FEATURE line of license.dat into synopsys.dat

ISE-Synopsys_TCAD_10.01+ permanent license ISE-Synopsys TCAD 10


ISE_TCAD_10.01
1) Install Cygwin for WinNT (in cygwin folder, run setup.exe)
2) Install ISE TCAD10.0 (setup.exe in root folder)
3) Copy license.dat file to C:\ISE\licenses directory
4) Edit license.dat to your hostname
5) Check / Create Environment Variables
a. ISEROOT (ex. ISEROOT=C:\ISE)
b. ISERELEASE (ex. ISERELEASE=10.0)
c. TMP (ex. TMP=C:\TMP)
d. TEMP (ex. TEMP=C:\TEMP)
e. ISEDB (ex. ISEDB=C:\DATAFILES\MYISEDATA)
f. DISPLAY (ex DISPLAY=HOSTNAME:0.0)
6) WinNT License Daemon
a. Open lmtools.exe from the \ISE\bin directory
b. Click “Configuration using Services” box
c. Choose “Configure Services” tab
d. Type a name for the “Service Name” (ex. ISETCAD)
e. Fill in the “Path to the lmgrd.exe file” with C:\ISE\tcad
\10.0\ix86\WinNT\etc\lmgrd.exe or the path you installed the software.
f. Fill in the “Path to the license file” with C:\ISE\licenses
\license.dat or the path you installed the software
g. Fill in the “Path to the debug log file” with C:\ISE\licenses
\license.log or the path you installed the software
h. Click on the “Start Server at Power Up” and “Use Services” box
i. Click “Save Service” button
j. Choose “Start/Stop/Reread” tab
k. Click “Start Server” button
l. Close lmtools.exe

TCAD

NEW Silvaco-Simucad_TCAD_2007.4_licensed



The file can be exicuted in place or it can be extracted with WinRAR
to a folder disk1.

From this disk1 folder exicute s

click next until it gets to the "Select Products and Sub-products"
page.

You must select Licensing (even though we will not use it) because it
installs some needed components to make all the tools work together.

Installation will continue for a while as it copies the files.

Installation will start another process to install SFLM and SIPC. You
will have to enter a password for SFLM Administration. It installs
SFLM as a service that you could later disable.

A web page is started for the SFLM server but you can just close this
page. We do not need to use it.

The installation should be complete now. The system asks to restart.
Do not restart at this point.

Open services and look for Standard Floating License Manager
(SFLMSERVERD) and stop it. Change its startup Type to Disabled.

Copy over cracked versions files to appropriate directory overwriting
existing file (make a backup if you desire).
or my license to Dir ETC

Set environmental variable for all users:
SFLM_ ********

Reboot computer

Run Deckbuild. Pick and example and validate and run it to validate
everything was installed correctly.

If you are running WinXP with SP2 you will have to unblock some
applications.

AMS,Logic_Verif. too

UTMOST IV

Optimization Module
More about UTMOST IV:


4_hires.pdf

UTMOST IV provides an easy to use, database-driven environment for the
generation of accurate, high quality SPICE models and macro-models for
analog, mixed-signal and RF applications.

Key Features

Supports any technology or type of device
Family of advanced optimization algorithms for both local and global
optimization
SmartSpice simulator provides accurate, verified simulation through
high-speed API interface
Fully integrated macro-model sub-circuit support at any complexity
Built on 64-bit Firebird relational database for storage, retrieval
and sharing of projects and data
Unlimited multi-target optimization and Rubberband optimization
Flexible data format enables import of measured data from any source
Available on Linux and Solaris,WIN

need?
gaurav sainger (12-01-07, 09:05 PM)
ASPENONE ASPEN Flarenet v2006 (with Manuals) - 1CD
HTRI Xchanger Suite v5.0 - 1CD

*** Sent via Developersdex ***
M G KIRUPA (12-03-07, 08:11 PM)
please send the crack for COADE CAESAR II v5.00.6

*** Sent via Developersdex ***
ALAA FRA (12-04-07, 12:38 PM)
HTRI Xchanger Suite v5.0 - 1CD
{Xace , Xfh , Xhpe , Xist , Xjpe , Xphe , Xspe, Xtlo , and
Xvib ]

*** Sent via Developersdex ***
ALAA FRA (12-04-07, 12:53 PM)
Crack Engineering Software
HTRI Xchanger Suite 5.0

*** Sent via Developersdex ***

Similar Threads